Scanner- How to view charts etc. in full page

[Andy@A&A]

In 2.24 you could bring up charts, histograms etc, to view in full page quite easily. You could easily switch views between them. in 3.0 I've tried clicking, double clicking etc and I cant make any of them full page view.
You can grab the side of a graph and slide it over to make it full page but that seems like a ridiculously hard way to do it.
Whats is the easy way to change back and forth between Chart, Graph, Gauge views?
Is there no way to just minimize a graph, chart or whatever? If you X it out you lose the data and there is no "right click, load all data" feature anymore?
Not only that but if you X out the gauges and then add the gauges back, a different set of gauges altogether comes back.
I'm obviously missing something very basic here.
I also read in another thread that the scanner auto saves all log files? I can't fine mine, other than the ones that I name and save.

[Keith@HPTuners]

See here: http://www.hptuners.com/help/vcm-sca...-overview.html

You'll want to drag/drop your various panes all onto one large pane. Then, you'll be able to switch between the tabs of your maximized views.

You can also hide the channels list on the left with the little pin icon.

[Andy@A&A]

Got it. Thanks Kieth.

[Andy@A&A]

Well that worked for a few days.
Now absolutely nothing happens if you try to drag any of the panes. What could have changed?

[94SS]

They messed the scanner up

[mowton]

Well that worked for a few days.
Now absolutely nothing happens if you try to drag any of the panes. What could have changed?

Andy. make sure you haven't locked the panes. Make sure the x appears in the upper right corner of the Chart and Graph pane. If not go to Layout>Lock Layout and unlock, the X will appear and you can drag them again.

Ed M

[ElecTech]

They fucked the scanner up

Works fine for me. Much better than the old one.

[schpenxel]

Works fine for me. Much better than the old one.

Indeed

[Andy@A&A]

Andy. make sure you haven't locked the panes. Make sure the x appears in the upper right corner of the Chart and Graph pane. If not go to Layout>Lock Layout and unlock, the X will appear and you can drag them again.

Ed M

Thanks Ed. That was it. The little "X" was just something that I didn't even notice. I saw the lock button but it didn't look like it did anything.