alright, I have been chasing this issue for a couple weeks now. I think its time to give in and see if you guys can help me.
for started here is some info on the build
2016 Mustang GT - 6m
Hellion Twin turbo 6266 setup
ID1000s
single Walbro 450lph pump
running E85
7psi of boost
other then that a stock car.
I have tuned Mopar and GM for some time, but this is my first personal attempt into the Ford side. Especially the coyote platform.
the issues I am running into are as follows.
- MAF reading seems very low. I have read up on some boosted s550 vehicles on here and referenced their MAF and Speed density adjustments, but whenever I try to implement those into my vehicle it wont start.
- My load readings are very low. I had my timing tables originally setup for as high as 2.0 (200%). But no matter what I do the load reading doesn't seem to exceed 90%
I'm Sure it is something simple I have just been battling this for far too long. Any help is appreciated.
id1000 last tune - 7-5-2016.hpt
4th gear pull.hpl
updated log with more PIDs
4th 2.hpl