Garmin Edge 1000 Cycleing computer

[joberry]

Garmin Edge 1000 cycle computer Data Template

Instructions...

1. Copy 'Data - Garmin1000.rrt' to your RaceRender3/Templates folder
2. Copy 'Garmin1000.jpg' to your RaceRender3/Images folder
3. Create a new 'Simple Video' Project - Add your video
4. Select File > Add Template to Project
5 Select 'Data - Garmin1000'
6. Add Data input file ie (.fit/.tcx/.gpx)
7. Add Image File (select the Garmin1000.jpg file from your RaceRender3/Images folder)
8. Accept/Ok
9. Select Garmin1000 in Input Files Box and Select Config
10. Check Chroma Key Enabled
11. Select Choose and Pick White and OK
12. Set Colour Range to 0
13. Select OK

14. Sync your data and Video as normal

This Edge 1000 has a Power field, if there is interest I will produce /upload other data variants

Data - Garmin1000.rrtGarmin1000.jpgPreview.bmp

[akobelan]

Thanks for doing this. Very nice. Looking forward to trying this.

[Fozzie]

Great. Works well. I don?t have power input or distance but I have Di2 electronic with is in my CSV file. So HR where distance is, then CADENCE . Then Front Gear then Rear Gear. Would be much appreciated if you could do this version. I am currently testing it with the Shimano CM 2000.

[Gary Lively]

Love it! Thanks for your help. I could probably do this, but this was painless. BTW - my data from a Garmin Edge 500.