Results 1 to 4 of 4

Thread: Garmin Edge 1000 Cycleing computer

  1. #1
    Potential Tuner
    Join Date
    Aug 2016
    Posts
    1

    Garmin Edge 1000 Cycleing computer

    Garmin Edge 1000 cycle computer Data Template

    Instructions...

    1. Copy 'Data - Garmin1000.rrt' to your RaceRender3/Templates folder
    2. Copy 'Garmin1000.jpg' to your RaceRender3/Images folder
    3. Create a new 'Simple Video' Project - Add your video
    4. Select File > Add Template to Project
    5 Select 'Data - Garmin1000'
    6. Add Data input file ie (.fit/.tcx/.gpx)
    7. Add Image File (select the Garmin1000.jpg file from your RaceRender3/Images folder)
    8. Accept/Ok
    9. Select Garmin1000 in Input Files Box and Select Config
    10. Check Chroma Key Enabled
    11. Select Choose and Pick White and OK
    12. Set Colour Range to 0
    13. Select OK

    14. Sync your data and Video as normal

    This Edge 1000 has a Power field, if there is interest I will produce /upload other data variants

    Data - Garmin1000.rrtGarmin1000.jpgPreview.bmp

  2. #2
    Potential Tuner
    Join Date
    Dec 2017
    Location
    Westmount
    Posts
    4
    Thanks for doing this. Very nice. Looking forward to trying this.

  3. #3
    Potential Tuner
    Join Date
    Dec 2017
    Posts
    1
    Great. Works well. I don?t have power input or distance but I have Di2 electronic with is in my CSV file. So HR where distance is, then CADENCE . Then Front Gear then Rear Gear. Would be much appreciated if you could do this version. I am currently testing it with the Shimano CM 2000.

  4. #4
    Potential Tuner
    Join Date
    Mar 2019
    Location
    Clearwater,FL USA
    Posts
    1
    Love it! Thanks for your help. I could probably do this, but this was painless. BTW - my data from a Garmin Edge 500.