Whipple Raptor won't make boost after changes..

[Volunteer]

Hello,
I need some help. I've got a 2013 Raptor with a Whipple. If I change anything in the tune it won't make boost and the throttle won't go past 25%. I don't have the stock tune for this truck. It had the Whipple before I got it. I think it's a check sum problem. I saw a thread where Eric Helped someone with a similar problem. I added long tube headers and high flow cats and now it flares when letting off the throttle and sometimes dies. I've attached the Whipple tune. Is this the right place for this problem or do I need to contact support?
Thanks.

[15PSI]

Can you give us some more detail? Injectors? Fuel?​ Do you have a recent log that you can post up?

[Volunteer]

I think it's the same problem Eric mentions in post #11 of this thread.

https://www.hptuners.com/forum/showt...hlight=whipple

15PSI, It has the injectors that came with the whipple and 93 E10 from the station down the street. I had a log but I didn't save it.

[15PSI]

That was over a month ago. Did you have the chance to send a note to support to see if the checksum changes have been implemented?

[Engineer@HPT]

Download latest beta software and try again.

[Volunteer]

Download latest beta software and try again.

Thanks, Good to go now.

[aksubiedubie]

Out of curiosity, when you datalog on this truck, do you frequently hit trans trunc in torque source?
your TCC torque truncation values look stock

[DBuck]

Looks like I am having the same problems as you, I have quickly compared the tune from a friend truck to yours and they look the same.