Working with an ID1300 e67 and trying to work around the 63# limit. Would it be possible/feasible to do half IFR/double stoich followed by say a 50% scale? My thought process behind this is to not lose so much resolution in the spark tables.
Working with an ID1300 e67 and trying to work around the 63# limit. Would it be possible/feasible to do half IFR/double stoich followed by say a 50% scale? My thought process behind this is to not lose so much resolution in the spark tables.
TBSS Cam Only Record Holder 1.467 60', 11.568 @ 116.86
Second Fastest Naturally Aspirated TBSS 1.484 60', 11.144 @ 119.46
Sure you can do that.. that?s what I do on Big power builds
I was moments away from flashing when I made the post. Much better results with dual scaling rather than doing a longhand 25% scale. Driveability is on point.