configuring how to set the output as a shift light.

[smokinHawk]

if i wanted to set one of my outputs as a shift light is this how i would do it on the output side?

[Keith@HPTuners]

looks good.

[Keith@HPTuners]

btw, you can test it very easily by setting your RPM trigger to 1500 and just give it some gas.

To try something neat, set the trigger at your idle speed.. and as your rpm fluctuates over and under that speed, your light will flicker as well.

[Tim05GTO]

btw, you can test it very easily by setting your RPM trigger to 1500 and just give it some gas.

To try something neat, set the trigger at your idle speed.. and as your rpm fluctuates over and under that speed, your light will flicker as well.

The ricers would love that! Maybe switch to a clear case with some pretty LEDs inside