Hi all,
I've searched and read the various posts on PE tuning, and I see in HPT help the Fuel Multiplier vs RPM table states post 99 vehicles. Can I still use this for my 98?
Do most people adjust the RPM ranges for the guestimated AFR where they expect to hit WOT and call it a day?
Thanks!
Yes, 98s use the PE table as well. If you don't have acces to a WB sensor just lean it out until the 02 mV's read around 900. This should get you pretty close. A WB is always best though to insure that you're getting the mixture you want.
98 M6 TA, mods: tsp torquer(233/233 .589 112), Patriot golds, ls6 oil pump, ls6 intake, tsp lid, pacesetter LT\'s and ORY, magnaflow, fra, HPTUNER!
Reply With Quote