In a 2018 Mustang, in order to change the gear ratio, do you have to change the drop down to "Calibration" and then set the ratio to whatever it needs to be? I seem to remember having to do it that way on the '05-'09 cars.
Thanks.
In a 2018 Mustang, in order to change the gear ratio, do you have to change the drop down to "Calibration" and then set the ratio to whatever it needs to be? I seem to remember having to do it that way on the '05-'09 cars.
Thanks.
s550 cars you change it from the special functions the scanner when you are connected to the vehicle but not logging, it will prompt you for rev/mile of tires(shows current value so you can just retype the current one if it hasn't changed) and then gear ratio(shows current value so you can see what is programmed stock)
The only Special Functions that I have in the Scanner are Crank Relearn and KAM Reset. No gear ratio change.
You can use FORScan or UCDS
v-performance.pl/
facebook.com/veee.performance/
https://www.instagram.com/v.performance.pl/
Remote tuning:
[email protected]
+48 697276579
It make no sense to buy another device, HPTuner should do it!
put a ticket it in, they should be able to add it...
But ForScan is free?Originally Posted by skythunder83
v-performance.pl/
facebook.com/veee.performance/
https://www.instagram.com/v.performance.pl/
Remote tuning:
[email protected]
+48 697276579
+1 for forscan FREE
yes you change it to calibration. if its an auto car, youll probably need to change the NV ratio as well so itll shift right
Reply With Quote