Results 1 to 17 of 17

Thread: 2011 Powerstroke Deletes

  1. #1
    Advanced Tuner
    Join Date
    May 2016
    Posts
    944

    2011 Powerstroke Deletes

    Anyone have a basic 6.7 Powerstroke tune with deletes they would send me. Truck is a 2011. My friend did deletes thinking I could tune for him but I don't tune diesels. Just need something basic to get truck running good again after delete and safe to tow.

  2. #2
    Advanced Tuner
    Join Date
    May 2016
    Posts
    944
    Will setting EGR and Regen tables to zero and disabling the codes work?

  3. #3
    Potential Tuner
    Join Date
    Feb 2016
    Location
    SARASOTA,FL
    Posts
    1
    No! Already tried everything, have to deal with someone that understands hex files and binary

  4. #4
    Advanced Tuner
    Join Date
    May 2016
    Posts
    944
    Was afraid of that. Only thing I could do is sell him a handheld from another company I use and get delete tune from someone to load on it I guess. If any of you can help me out with that send me a message.

  5. #5
    Potential Tuner
    Join Date
    Apr 2015
    Posts
    9
    Feel free to Shoot me a pm if you need some help on this topic

  6. #6
    You cant flash a file with a different VIN so someone else's file wont help.

  7. #7
    Tuner
    Join Date
    Jul 2019
    Location
    Florida
    Posts
    51
    Need help I?m already deleted and get check sum error 2012 6.7 powerstroke deleted

  8. #8
    Tuner
    Join Date
    Jul 2019
    Location
    Florida
    Posts
    51

    User defined math hex conversion

    With hex and user defined math perimeters

  9. #9
    Quote Originally Posted by Jeffrey Kavney View Post
    Need help I?m already deleted and get check sum error 2012 6.7 powerstroke deleted
    You get a checksum error when you read your already deleted truck? If so, send the file to support and see if they can fix it.

  10. #10
    Tuner
    Join Date
    Jul 2019
    Location
    Florida
    Posts
    51
    They told me it has to be returned to stock I?m going to send it anyway and see if that?s not there response because of EPA stuff I live in FL and have been getting ready for hurricane I?ll get it sent out and see where I am
    Thanks

  11. #11
    Tuner
    Join Date
    Jul 2019
    Location
    Florida
    Posts
    51
    I?m up against the same issue any help would be much appreciated

  12. #12
    Quote Originally Posted by Jeffrey Kavney View Post
    I?m up against the same issue any help would be much appreciated
    Do you have a way to turn it back to stock? Like with the programmer that was used to delete it?

  13. #13
    Tuner
    Join Date
    Jul 2019
    Location
    Florida
    Posts
    51
    Yes and know. after last updated it would freeze while data logging and got an error code that I believe was around low voltage checked both batteries near 12.7 amps disconnected
    The other reason is I?m deleted and it will go into limp mode and I am not familiar with hex
    Not sure if I?ll be able to figure it out using user defined math. I sent file to HPT support hopefully they will help me out. The email I sent before I had file told me to take truck to ford but I would need to have it towed

  14. #14
    Tuner
    Join Date
    Jul 2019
    Location
    Florida
    Posts
    51
    Yes deleted

  15. #15
    Quote Originally Posted by Jeffrey Kavney View Post
    Yes and know. after last updated it would freeze while data logging and got an error code that I believe was around low voltage checked both batteries near 12.7 amps disconnected
    The other reason is I?m deleted and it will go into limp mode and I am not familiar with hex
    Not sure if I?ll be able to figure it out using user defined math. I sent file to HPT support hopefully they will help me out. The email I sent before I had file told me to take truck to ford but I would need to have it towed
    I can probably help you with the User Defined Parameters part of it, but you would need to have a good read with HPT first. You need to get it fixed either by hauling it to the dealer or sending me your PCM.

  16. #16
    Tuner
    Join Date
    Jul 2019
    Location
    Florida
    Posts
    51
    I would really appreciate it I?m going to get it flashed back to stock want me to PM you the file

  17. #17
    Tuner
    Join Date
    Jul 2019
    Location
    Florida
    Posts
    51
    I got the file should Email you or post it here