Results 1 to 3 of 3

Thread: no start after fail write

  1. #1

    no start after fail write

    flashing tune for the hundredth time. Power would not shut off to finalize flash. now no power to starter . car powers on but when pressing button to start , all power go turns off and nothing . All the lights flashing rapidly on tuner , can not reflash .
    I have unhooked battery and will let it set for a while to see if ecu re sets.
    Any ideas?

  2. #2
    Senior Tuner
    Join Date
    May 2015
    Posts
    1,909
    make sure you have the latest beta or standard vcm suite version, try doing a write calibration again.

  3. #3
    Quote Originally Posted by 06300CSRT8 View Post
    make sure you have the latest beta or standard vcm suite version, try doing a write calibration again.


    Thanks. Got it figured out . I could not write after that , but the issue was battery went under threshold voltage . Charged it up and all is well now.