Hey Everyone
Im new to hp tuners and im trying to log some data.
My setup;
95 LT1 with a Torqhead 24x converstion
cc503 cam and valvetrain upgrade
mid length headers, no cats, 3 inch from Y pipe back
I went for a drive today and noticed several strange spilkes in my B2 LTFT. I confirmed all O2 wiring is correct. No exhaust leaks. Whats the next step? Am i logging the correct LTFT pids?
Log Attached. my wideband input was not working correctly in this log, its stuck on 7.52. However I was watching it frequently and it was pretty steady between 14 and 15 while driving normally. in the 13s under wot