Results 1 to 4 of 4

Thread: New to tuning need some help

  1. #1
    Potential Tuner
    Join Date
    Jul 2019
    Posts
    1

    New to tuning need some help

    Hey I'm new to all this slowly trying to learn on 2 of my vehicles... Any advice on what to modify on the tune? And was wondering what everyone logs on their scanner to make adjustments...
    I have 2013 charger r/t with cai and headers ...and a 2014 charger srt with cai... just dont know where to start on, the r/t so far I disabled the back o2 sensors and messed with timing but I seen the knock sensor go into -4.2 ....

  2. #2
    I tune Mopar from home. If you want some help, I can try my best to walk you through how I would go about it.

    Message me on facebook if you like: Demigod Tuning

  3. #3
    Advanced Tuner 2therock's Avatar
    Join Date
    Jun 2009
    Location
    N. GA
    Posts
    499
    This is a 2013 R/T dyno tuned. Stock, Corsa Cat Back, 180 T-Stat.
    Use the compare function to see whats different and perhaps get some insight.

    charger_dynotuned_read_sept_4_16.hpt
    Radix'd 05 L33 5.3 ECSB Z71 @ 387-HP 395-TQ
    2013 Dodge Charger R/T Plus, Stock 5.7L, Edelbrock E-Force Stage 1, 3.25" Pulley, 412-HP 430-TQ Mustang Dyno Numbers.

  4. #4
    Advanced Tuner
    Join Date
    Mar 2018
    Location
    Illinois
    Posts
    662
    Quote Originally Posted by Slowguy View Post
    Hey I'm new to all this slowly trying to learn on 2 of my vehicles... Any advice on what to modify on the tune? And was wondering what everyone logs on their scanner to make adjustments...
    I have 2013 charger r/t with cai and headers ...and a 2014 charger srt with cai... just dont know where to start on, the r/t so far I disabled the back o2 sensors and messed with timing but I seen the knock sensor go into -4.2 ....
    Here are some links that helped me.
    https://forum.hptuners.com/showthrea...l=1#post525502