Page 2 of 2 FirstFirst 12
Results 21 to 29 of 29

Thread: Transmission tuning help - 8L90e

  1. #21
    Tuner
    Join Date
    Nov 2018
    Location
    West Coast
    Posts
    76
    I just invested in the tuning schools gm transmission book. It will be here in 2 days or so.
    There is just too many ways to mess things up with an unlocked TCM.

  2. #22
    Tuner in Training
    Join Date
    Aug 2019
    Location
    Cleveland, TN
    Posts
    41
    educational material is always good. let us know what you figure out

  3. #23
    Tuner in Training
    Join Date
    Aug 2019
    Location
    Las Vegas, NV
    Posts
    19
    So i can't figure out how to properly calculate the Low adjust value.
    Here are the parameters from the 2015.5 Yukon Denali:

    The final drive ratio is 3.23:1 (Differential gear ratio)
    The transfer case ratio is 2.69:1
    1st gear is 4.56:1
    6th gear is 1:1
    8th gear is 0.65:1

    The calculated Low Adjust Value is shown to be 0.73
    Can someone explain to me how it got calculated?

  4. #24
    Tuner
    Join Date
    Nov 2018
    Location
    West Coast
    Posts
    76
    I thought the transfer case was 2.42
    If that is the case then its you are going at 73% as fast in 4wd low as you would in drive (no 4wd lo)

  5. #25
    Potential Tuner
    Join Date
    Mar 2019
    Posts
    1
    New to the forum, I have the same setup as the OP (Jeep with L86 and 8L90). Also looking to get into the transmission and understand what all this means.

    I?m not sure what the Yukon transfer case ratio is, but I believe the correct way to turn it into a percentage is to divide 1 by the ratio. So, a 2.42 would be .41 and a 2.69 would be .37. Neither of which get us to .73. That would be a transfer case ratio of 1.37 to 1 which I doubt anyone would make.

    Interested in getting this figured out!



    Quote Originally Posted by fifty View Post
    I thought the transfer case was 2.42
    If that is the case then its you are going at 73% as fast in 4wd low as you would in drive (no 4wd lo)

  6. #26
    Tuner
    Join Date
    Nov 2018
    Location
    West Coast
    Posts
    76
    I’m finding a 2.69 and 2.42 low ratios. But apparently there is a different ratio of you got the tow package or not...

  7. #27

  8. #28
    Tuner in Training
    Join Date
    Aug 2019
    Location
    Las Vegas, NV
    Posts
    19
    I came up with the same calculations as conquistador (forum user). If anything the Low Adjust value should be 1/(transfer case gear ratio).

  9. #29
    Tuner in Training
    Join Date
    Aug 2019
    Location
    Las Vegas, NV
    Posts
    19
    Ok so this is still an open and unresolved thread. Can someone please explain to us how to get to the correct Low Adjust Value?
    Thank you!