hello i have a dlg-1 innovate wide band gauge
i have a lsa and a chev connect and cruise kit {e67 ecu} in a Holden commodore vn 1989
now afr gauge has two wires for each sensor that allows me to data log to an ecu i have seen write ups in here for the ls1's using the a/c and egr
as part of the kit it only uses 2 of the 4 sensors front two only rear two are hanging in the breeze and i was wondering if i could connect the yellow wires to each left and right bank secondary o2 sensors plugs to log in the vcm scanner
does anyone if this is possible ?
what wire would i need to pick up on the Trapezoid 4-Position o2 connector
lastly would i use the same formula as the ls1 ecu as per link https://forum.hptuners.com/showthrea...nd-through-EGR
thank you help is much appreciated