Results 1 to 2 of 2

Thread: Siemens Delka 80lb Injector Data for P04?

  1. #1

    Siemens Delka 80lb Injector Data for P04?

    Has anyone used 80lb injectors on a p04 computer and could send me their tune? I have been trying to make sense of converting values from an ls1 style computer into the p04 but the tables arent even close to matching and I have not had any success.




    2000 Bonneville ssei computer. E85 smaller pulley zzp cam in a nissan 240sx (rwd).

  2. #2
    Senior Tuner cobaltssoverbooster's Avatar
    Join Date
    Dec 2008
    Location
    Nevada
    Posts
    4,209
    as long as you can run 80 lb/hr in the flow rate table without limitation then you should be ok. These should be close to sd 80's on a vacuum referenced regulator. its how the 2000 bonneville file in the repository is setup so i duplicated it with sd 80 data i had.
    Attached Images Attached Images
    rdrfabrication@gmail.com
    2016 GMC 3500 Denali Diesel
    2000 Ford Mustang - Top Sportsman

    Ecotec help can be found here:
    LNF-http://www.hptuners.com/forum/showth...357-LNF-Guides
    LSJ-http://www.hptuners.com/forum/showth...965-LSJ-Guides