Results 1 to 4 of 4

Thread: Export to e-Motion function not working

  1. #1
    Potential Tuner
    Join Date
    Apr 2017
    Location
    Vermont USA
    Posts
    6

    Export to e-Motion function not working

    Hello
    I have tried multiple times to export my licensed file to e-motion to use in my new hpt ngauge.
    But every time I try it had a error
    it asked to plug in interface, I do that. in completes translation upload.
    then it pops up and says "Submission Invalid
    I have tried
    Updating VCM suite to most current.
    ensuring the file is licensed (I did so by flashing the truck with the file)
    Have tried other licensed files. and still same issue.
    I also tried to open a .stk file from ngauge and it has error translating.
    then I decided to try my newest truck that has a licensed file and when I try to export that one (2013 f-350) in only offers export for Powerteq

    Has anyone had this problem? seams like a vcm editor issue

  2. #2
    Potential Tuner
    Join Date
    Apr 2017
    Location
    Vermont USA
    Posts
    6
    No one has had this issue I’m guessing?

  3. #3
    Senior Tuner
    Join Date
    Jan 2014
    Location
    Australia
    Posts
    1,100
    is ngauge updated to its newest firmware 299 ? i think it said something about fixing some errors in the last update

  4. #4
    Potential Tuner
    Join Date
    Apr 2017
    Location
    Vermont USA
    Posts
    6
    Yes has newest update