Anyone using these tables yet?
Just noticed them in the Driver Demand section.
Anyone using these tables yet?
Just noticed them in the Driver Demand section.
I'm curious about these new tables as well.
2022 Cadillac CT5-V Blackwing (733 whp)
2022 Cadillac CT4-V Blackwing (716 whp), 10.750 @ 134.77 mph
2016 Cadillac ATS-Vs (eleven ATS-Vs in the 9s)
2008 Pontiac G8 (first G8 in the 10s), 10.727 @ 129.87 mph
2000 Bonneville SSEi (first 3800 Bonneville in the 10s), 10.711 @ 125.71 mph
1999 Grand Prix GT (first 3800 FWD in the 8s), 8.902 @ 154.90 mph
1998 Firebird (first 3800 RWD in the 8s), 843 whp, 8.991 @ 152.12 mph
1998 Grand Prix GTP (first 3800 FWD in the 10s), 9.499 @ 145.13 mph
I maxed out the tables -6040 and +6040 and the pedal/throttle definitely feels and works like one might think it should. Very nice.
Now I am returning to the Driver Demand tables to see if I get more predictable and direct results from part throttle adjustments.
Which ones did you change? I see 9508 (enable bit), 9509 through 9512 (decreasing) and 9513 through 9516 (increasing).Originally Posted by Higgs Boson
2022 Cadillac CT5-V Blackwing (733 whp)
2022 Cadillac CT4-V Blackwing (716 whp), 10.750 @ 134.77 mph
2016 Cadillac ATS-Vs (eleven ATS-Vs in the 9s)
2008 Pontiac G8 (first G8 in the 10s), 10.727 @ 129.87 mph
2000 Bonneville SSEi (first 3800 Bonneville in the 10s), 10.711 @ 125.71 mph
1999 Grand Prix GT (first 3800 FWD in the 8s), 8.902 @ 154.90 mph
1998 Firebird (first 3800 RWD in the 8s), 843 whp, 8.991 @ 152.12 mph
1998 Grand Prix GTP (first 3800 FWD in the 10s), 9.499 @ 145.13 mph
all of them. Predicted and Immediate Increasing and Decreasing. And Disabled the Idle one.
All Decreasing is -6041
All Increasing is 6041
Which vehicle are you guys seeing these on? Just did a fresh read with 4.5.655 beta of a 2019 ZL1 A10 and don't see them listed under driver demand tab.
Typically 14-16 vehicles
Email Tunes, Bencharles_10@hotmail.com
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
Mine is a 2017 Z06 and I also had them added to my wife's 2019 Yukon OS. If you don't see them then HPT can add them if you send your file to support.
I also had them added to a 17 Yukon customer car so far.
I can say it made a major difference in how the throttle feels and how the car acts. These tables are a nuisance left stock.
Nice!! I need to update my software
Email Tunes, Bencharles_10@hotmail.com
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
Just adjusted mine, ill post feed back later this week.
I have a 2014 e78. I don't see these tables so based on above posts my steps are update software by downloading vcm suite and sending my file to support if I don't see those tables? Super new here thanks for the info! My car isn't v8 but I'm hoping this will be available for me.
I'm going to test this on my personal vehicle later. 2017 Z06 as well, 7 speed.
Can anyone list the Table ID for these to get them added?
I will say I will probably revise some of the decel areas back to stock or near stock values, need to log it and see which areas though. Coming off pedal to 0% sometimes feels a little too quick or abrupt of a throttle close. Accel and steady state feels awesome.
so cool will see if I got them also. maybe this can be a solution to lazy throttle helping 60 foot times. full throttle only happens after 5mph.
Cheers
My thoughts exactly, fingers crossed!
Did you have to do a re-read for them to show up in your cal? Or should I get hpt to add them to mine. Curious to play with them.
I have noticed them in some later read customer vehicles.
no need to reread to see new tables (ever). just need the HPT version with the ability to display them.
Didn't think so. I requested them for my OS
How do you request them? I don?t see them on a 16 ss
Reply With Quote