Hi All,
I am in need of some help getting my car running and idling properly so i can get to tuning. I am currently trying to get the car running with just the MAF before i jump into speed density. The problem i am having is no matter what i change in the airflow vs freq map I cant get the car to run leaner than 11AFR. I believe i might have made a mistake when scaling the injectors with the provided data (Attached) but am running out of things to try and change before i wash down the cylinder walls.... Unfortunately this is my first go at HP tuners but i have plenty of experience with megasquirt and tunerstudio.
Car Modifications:
-2008 Z06
-Roughly 10:1 compression
-working with 93 octane gas (E85 in the future)
-Vortech YSI
-Fuel Injector Connection 2200cc injectors
https://fuelinjectorconnection.com/c...dance-injector
-Stock MAF
-Stock Map (will be swapped out with 3 bar when i'm ready for speed density
-Return style fuel system with twin 340 in tank pumps 58psi base pressure (Boost referenced)
-Cam - https://www.briantooleyracing.com/st...-camshaft.html
-2010+ ecu software from DSX tuning
Please see attached current tune file as well as the injector data I was sent. Unfortunatly i am still waiting on my pro cable for my mvpi2 to log my wideband. I will be receiving it Friday and will post a log of the current idle and run.
Any help would be greatly appreciated. These massive injectors have proven to be more of a pain then they may be worth.
Thanks,
Mike2008-Z06-MJM2.hptFIC2000BOSCHLSXHPT.xlsx