Results 1 to 1 of 1

Thread: NGauge logging wont recognize channels in graphs in vcm scanner

  1. #1
    Potential Tuner
    Join Date
    Apr 2017
    Location
    Vermont USA
    Posts
    8

    NGauge logging wont recognize channels in graphs in vcm scanner

    Hello I am having a issue with a log pulled from NGauge on a 2016 F-350 6.2L copperhead 2048 k
    I open the log in VCM Scanner 4.4.4 and it populates the channels and I can see that most the channels have live readings but gauges and graphs wont let me use any of the channels to monitor in the graph or gauges. and if I click on
    "Show only parameters backed by channels" It shows not many options
    Not sure if I am doing something wrong or if there is a support issue with NGauge logs and VCM Scanner
    Any ideas what I may be doing wrong?
    I also converted the NGauge .csv log to VCM Suite .hpt both files are here
    Attached Images Attached Images
    Attached Files Attached Files
    Last edited by Bullocks Diesel; 10-25-2019 at 11:46 AM.