Results 1 to 7 of 7

Thread: 10R80 increasing shift pressure

  1. #1
    Advanced Tuner
    Join Date
    Feb 2016
    Posts
    260

    10R80 increasing shift pressure

    what a good increase amount in line pressure for shifts-- stock pressures are 261 whats a good amount to add on top of that pressure ?
    some tunes I have seen have added about 15% increase what the best amount to add ? safely

  2. #2
    Advanced Tuner
    Join Date
    Feb 2016
    Posts
    260
    ? No one again

  3. #3
    Advanced Tuner JaegerWrenching's Avatar
    Join Date
    Jun 2018
    Location
    Albuquerque New Mexico
    Posts
    243
    Quote Originally Posted by paulsmithsr View Post
    ? No one again
    I think stock pressure is good if tuned well.

  4. #4
    Tuner
    Join Date
    Jul 2019
    Location
    Florida
    Posts
    114
    300 is as high as I go with and I haven?t had any issues

  5. #5
    Advanced Tuner
    Join Date
    Feb 2016
    Posts
    260
    Thanks for response

  6. #6
    Tuner in Training
    Join Date
    Sep 2018
    Location
    Knoxville, TN
    Posts
    31
    Paul, in Shift Properties Tab, Inertia Phase Tab, all the way to the left in Upshift Multi (not the alts) I lower the numbers in the highest pressure on the bottom right to .30-.50 for the bottom couple rows and it firms up the shifts nicely.

  7. #7
    Advanced Tuner
    Join Date
    Feb 2016
    Posts
    260
    Thanks will try