Results 1 to 2 of 2

Thread: should I be worried? damaged o2 sensor

  1. #1

    should I be worried? damaged o2 sensor

    I got my wideband bung installed today and the idiots who installed it burned a little bit of my Bosch wideband sensor. I hooked it up and started my truck and it was reading 16.3.-17.3 AFR. Should I be worried they damage the sensor? see picture below where I circled the tip is where its missing that area of metal and you can see the inner workings of the sensor.02sensorcircle.jpg

  2. #2
    I went and did some cruising around and the wideband seemed to work fine and read fine. I didnt got WOT since I didnt have the 91 octane in the tank, but I think I'm fine.