Results 1 to 13 of 13

Thread: 6.7 cummins support

  1. #1
    Tuner CousinChevro's Avatar
    Join Date
    Apr 2016
    Location
    Whitehorse
    Posts
    61

    6.7 cummins support

    I?ve been looking around the forum and couldn?t find my answer. Are we only limited to CR 5.9?s ?? Is their any chance of support for the 6.7?s?
    If you can't fix it with a Hammer, You have Electrical problems.

  2. #2
    Tuner in Training
    Join Date
    Jan 2020
    Location
    Iowa
    Posts
    17
    I am running it on my 2008 6.7. Works great so far.

    -Dieseldude
    2008 Dodge Cummins 6.7 - 2nd Gen Swap S467.7/83/90, No Grid Heater, Banks Intake, BD Flowmax LP, G56 w/SB Clutch.

  3. #3
    Advanced Tuner Jim P's Avatar
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    886
    2007.5-2012 6.7L Cummins is supported. It?s in HP Tuners supported vehicle list.

  4. #4
    Tuner CousinChevro's Avatar
    Join Date
    Apr 2016
    Location
    Whitehorse
    Posts
    61
    huh, I couldn?t find the vehicle list. Good stuff.. 2013-2020 is what i?m waiting and hoping for..

  5. #5
    Advanced Tuner Jim P's Avatar
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    886
    They have no plans on 2013+ at this time

  6. #6
    Advanced Tuner Jim P's Avatar
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    886

  7. #7
    Tuner in Training
    Join Date
    Mar 2015
    Posts
    19
    have wanted and asked for 2013+ support for 5 years, for some reason they don't seem to be interested in providing it and they wont tell why

  8. #8
    Tuner CousinChevro's Avatar
    Join Date
    Apr 2016
    Location
    Whitehorse
    Posts
    61
    Cummins is stingy with their coding, Especially in the HD world.. so maybe the developers are not wanting to entertain finding the exploits

  9. #9
    Advanced Tuner Jim P's Avatar
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    886
    Everyone else figured it out

  10. #10
    I emailed them about CM2350 and 2450 support 2 weeks ago. They said it is on their radar but no ETA. I just got a 2019, so I won't be doing anything to it for a few years. Hopefully HP will support it by then

  11. #11
    Advanced Tuner Jim P's Avatar
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    886
    EFI and EZ supports 2019

  12. #12
    I may have to get EFI, though I do enjoy using HP Tuners (I also have a 2018 Durango RT and 2015 JK Wrangler). I would have to learn how to create a .cax file...
    2010 CCSB 68RFE - HP Tuner self tuned - BD Diesel Protect68 Kit - Transgo HD Shift Kit - 4" TBE Exhaust w/ 17" FTE Resonator - Crower 110lb valve springs - Manton Series 3 Push Rods 7/16x.120 - 12.9 head bolts - Fleece CP3k - 60% Nozzles - Smeding Intake Horn

  13. #13
    Advanced Tuner Jim P's Avatar
    Join Date
    Jan 2018
    Location
    Everywhere
    Posts
    886
    Cax files are easy to create and honestly EFILives user defined parameters system is far superior
    Last edited by Jim P; 02-27-2020 at 01:42 PM.