Hi guys,
I have done a lot of Driver Demand tuning on the earlier cars 2011-2014, and the logged ETC TQ Request table has always matched a lookup of my Driver Demand table for a given pedal position and RPM.
On this 2015 I'm working on, that is not the case. For example, at 4000 rpm and 73% pedal, my DD table calls for 500 ft-lbs, but the ETC TQ request logs as 252 ft-lbs.
- There are no DD limits active
- TQ Source = DD
- Throttle angle source = TQ control
What am I missing here?