-
Tuner in Training
Innovate ECF-1 Setup/Logging?
Installing my new ECF-1 to see E content and fuel pressure. Already had a WB, but took old out to just use one gauge setup for 4 parameters.
- I have the WB setup to log via equivalency ratio, so I am not too worried about that.
- Fuel temp I can just glance at, no need to log.
- E content I can view on gauge, so really no need to log that in pro, but be nice to have the ability. Anyone have the transform/math for this?
- Fuel Pressure does not have any transforms stored in HPT to choose. Anyone have magic formula? Looked through my manual, and did not see the scale other than 0v=0psi and 5v=145psi.
Any help is appreciated.
Cody
-
Tuner in Training
Any info on equation for fuel pressure? All setup and ready to log other than that equation...
-
Tuner in Training
Due to lack of response, I decided to use the quick math and just go with V/ (1/29) = PSI
Watching gauge, it is close enough to get my logs where i need to see if FP falls off.