Originally Posted by
bb-tt
That was right after tightening wg crack pressure. on the production tune. I am going to loosen the wastegate tension one turn then log with this file a few times to get a good baseline from that. After that they reloaded my folder with my beta tune that ran much better than the current tune so i am going to flash that and see what it does. Will get you logs of that which i expect to look better. Then will buy credits and try your base file.
Edit: oh requested boost is 22.5 but you cant see that bc we are still waiting for HPT to update the pids. when i was on my previous tune was boosting a little over 23-24 psi, maf was maxing 2 330 and timing was at 9?. when i reflashed was only getting 18 psi, maf in 260s and 3? of advance. I set preload to 9 psi and that is what it is boosting at now. going to loosen preload by 1 turn and see what it does.