Results 1 to 4 of 4

Thread: VR30-VCM- Missing wastegate position channels?

  1. #1
    Advanced Tuner
    Join Date
    May 2009
    Posts
    475

    VR30-VCM- Missing wastegate position channels?

    I am trying to locate the wastegate position A and B channels do I can data log. I see it in parameters, but not channels.
    2018 Infiniti Q60s


    2004 350z/LS2: ERL 434ci, 11.8:1,TFS245cc,262/266@113+3,Fast102,NX 102 plate,60#injectors/return w/twin 255s
    Old setup: CNC'd317s, Fast 102, 228/228@114, PT88,83#injectors/full return system. 10.84@138

  2. #2
    Tuner in Training
    Join Date
    May 2016
    Posts
    21
    Quote Originally Posted by Snyper View Post
    I am trying to locate the wastegate position A and B channels do I can data log. I see it in parameters, but not channels.
    Snyper, I believe that you need to submit an HP Tuners Support ticket for this. Currently I am not able to log knock for my 2012 FX35, I see it under parameters, but not under channels. I have submitted the ticket to try and get things updated for my application and Evan (i think) is working on it. No ETA for my issue, but I have hopes.... I am guessing you will have to do the same.

    - Matt

  3. #3
    Quote Originally Posted by Snyper View Post
    I am trying to locate the wastegate position A and B channels do I can data log. I see it in parameters, but not channels.
    Wastegate position is a memory parameter available after extended datastream is applied. You have to repoll for supported parameters once you do thisl.

  4. #4
    Advanced Tuner
    Join Date
    May 2009
    Posts
    475
    Quote Originally Posted by evan.s@hptuners View Post
    Wastegate position is a memory parameter available after extended datastream is applied. You have to repoll for supported parameters once you do thisl.
    Is there any way around this? Id like to read what the car is doing before loading in a file.
    2018 Infiniti Q60s


    2004 350z/LS2: ERL 434ci, 11.8:1,TFS245cc,262/266@113+3,Fast102,NX 102 plate,60#injectors/return w/twin 255s
    Old setup: CNC'd317s, Fast 102, 228/228@114, PT88,83#injectors/full return system. 10.84@138