My LS swap is complete. 2013 6.2. Starts up and idles great. When I press the throttle pedal, nothing. The HS Scanner shows the pedal is moving, but the throttle body doesn't. I have ohm checked all the wires from the accelerator pedal to the ECM and from the ECM to the throttle body. all are at or under .2 ohms. Also checked all to ground and all were good. Verified 5v into the pedal and checked it to reference ground. New throttle pedal didn't help Also, electrically checked the throttle body with a multimeter and didn't see any issues. Any Help is greatly appreciated.