Quote Originally Posted by Leg_Twitch_7.0L View Post
Brother sorry to bother you but there is a small issue with one PID which is Torque the numbers that it shows are way off ( from 100 to 3500 nm ) another PID that doesnt make sense is spark advance there are two PIDs both called spark advance but while one is between 5 and 30 which is what it should be the other spark advance is always above 30 degree but other than that everything else looks good
I'll check the torque pid, if you're running anything that's significantly increased horsepower the estimated torque is going to be way off unless you've adjusted the map accordingly.

For the spark pids, are you logging, SAE or common identifiers?