5.9 Magnum Gas Dodge Ram Tuning and Tire Size Change

[rmcleod]

looking for some tune files for dodge magnum 5.9 360ci gas engine

[14HemiRam]

Have you come across any? Anyway you could share you stock file my son has a 96 Ram 360 and was wanting to check out what all can be tuned. Thanks

[ebddrake]

i have a 2001 Durango 5.9 file 2001 Durango RT David.hpt

[jimmyZJ]

I'm tuning zj 5.9 for E85
98 ZJ 5.9 and Dodge Ram 5.9 have very different calibration file, fuel & timing

[jonfrabitoy]

looking for some tune files for dodge magnum 5.9 360ci gas engine

have you found a tune yet?

[jbliss15]

im trying to find a way possible to adjust tire size / speedo with jtec+. doesn't seem to be a way in HPT

[Reapreap]

Here's a 5.9 magnum base tune
01ram59.hpt

I'm also looking for a way to calibrate the speedo. I tried the "controls and special functions" in VCM scanner but it's just blank. Seems the answer is it's not supported on our vehicles. What are our options for changing speedo for new tire size?

[putts000]

Jtec/+ tire size calibration is set in the ABS module. You need a higher end scanner to set. HP tuner only talks to the PCM on Jtec cars. I have a snapon solus edge that does it.

[jbliss15]

Jtec/+ tire size calibration is set in the ABS module. You need a higher end scanner to set. HP tuner only talks to the PCM on Jtec cars. I have a snapon solus edge that does it.

damn.

[EvilR/T]

Jtec/+ tire size calibration is set in the ABS module. You need a higher end scanner to set. HP tuner only talks to the PCM on Jtec cars. I have a snapon solus edge that does it.

I have a Solus Pro that uses keys, can I adjust the ABS module with it? Does the Solus Edge use keys?

[RumZ25]

i Replaced my ECu and i have no idea where to get a stock tune for my 02/03 ram with 5.9 magnum
there is no stock tune in repository ?? help plz