Results 1 to 3 of 3

Thread: Thoughts on Ilde

  1. #1
    Advanced Tuner Ghostnotes's Avatar
    Join Date
    Feb 2012
    Location
    Houston, TX
    Posts
    408

    Thoughts on Ilde

    I only get a short time when I'm home to mess with my C7/M7 but would like some criticism on the idle i have. This has LTH large cam and YSi-V7,head work. I see that the trims look good, Starts and falls into idle without surging, Timing looks ok but would like a pro to look at it in general.



    Thanks.
    Attached Files Attached Files
    I always tune VVE....

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    2,759
    seems like your High pressure pump is a lttle lower than normal

    as you can see its requesting 400-500 psi but only seeing about half

    could be issue with the install and the lash clearance
    Follow @MASTUNING
    Remote Tuning Sultan@mastuning.net
    Contact/Whatsapp +966555366161

  3. #3
    Advanced Tuner Ghostnotes's Avatar
    Join Date
    Feb 2012
    Location
    Houston, TX
    Posts
    408
    Never realized that, it keeps up during high pressure demand. There is no lash, It's just 10% over lobe. Was told and read at 10% you don't need a lash cap, but that was 2-3 years ago. Only thing I did was re-span the columns per the Banish DVD. Wouldn't think that would matter.
    I always tune VVE....