Scanner Configuration & Histogram Repository

[405HP_Z06]

2008
Chevy
HHR SS Auto
PCM 12625310
TCM 24243902
3GNCA63X88Sxxxxxx
General Tuning

Misfire and knock tuning config file.


NOTE: Do not open the .cfg or .hst files with anything but the scanner.

For version 2.22 and later, file locations are as follows:

The .cfg (configuration files) are located:
C:\Documents and Settings\<USER NAME>\My Documents\HP Tuners\VCM Scanner\Configs

The .hst (histogram files) are located:
C:\Documents and Settings\<USER NAME>\My Documents\HP Tuners\VCM Scanner\Histograms

[tnsyty]

Anyone have anything for the L61 eco for the cavalier?

[MaxiM_X]

I cant seem to load the attached files. Specifically the 2.0t tune. It sais "unable to parse log" Any ideas?

[405HP_Z06]

I cant seem to load the attached files. Specifically the 2.0t tune. It sais "unable to parse log" Any ideas?

Which attached files, specifically and what are you referring to as '2.0t tune'?

[MaxiM_X]

The solstice, sky, cobalt 2.0t tune available in this thread.

[405HP_Z06]

The solstice, sky, cobalt 2.0t tune available in this thread.

There are not any .hpt file's in this thread. These are all configuration (.cfg) and histogram (.hst) files.

If your looking for tune files (.hpt), the tune repository is the place to look.

[mgm1979]

Here's what I'm using now

2004 Saturn Ion Red Line
SD / Misfire Tuning

Wideband: Innovate Motorsports LM-2


Only thing I can't figure out is the boost parameter - I used to have a custom (user defined) PID which took the MAP and current Baro readings, and converted it to the REAL boost...for whatever reason (perhaps software updates?) it doesn't seem to work anymore, and I can't remember how to set it up.

[GeoffH]

I'm posting this one with baldturbofreaks permission, some of it may be over the head of the avg user but is a very good config IMHO.

I'm also working on a few varients of it but it may take a while.

This should work on all the 2.0t pcm's ie solstice gxp, sky redline, cobalt ss/tc, & hhr ss/tc

I can't open log, it says: Unable to parse log

[GeoffH]

I was able to find it, but it is so big on my lap top, i can't see everything

[Iam Broke]

If you get an error opening the cfg, download it into the config folder under the scanner and then open it with the scanner software. The one I just posted above wouldn't open correctly until I saved it locally. I have the latest beta here.

[elite_cyborg]

Thanks man

[HawkZ28]

Here's the 2 that I've been using on our 02 TB and our 05 Colorado......I have to give credit to Trailblazin and Doug- I've built on plagarization! I used theirs as a base, and built on it to filter out more conditions that we generally turn off in the tune.

With these 2, you don't have to worry about PE, and DFCO depending on your DFCO map settings. You can always adjust it in the histo filter to your settings to weed out DFCO.

I'll apologize in advance for the lack of order in the TB config.

[PSYKOSTEVO]

Still nothing for L61's?

[Cobalt09SS]

I have tried severeal times to create these and EPIC FAIL!

[1107359429]

If you get an error opening the cfg, download it into the config folder under the scanner and then open it with the scanner software. The one I just posted above wouldn't open correctly until I saved it locally. I have the latest beta here.

Hey i tried everything and i'm still getting that unable to parse crap. I have a 06 m6 GTO and ever since i've had it, the first histogram (Main spark timing advance, engine speed vs g/cyl) Only plots at the last row. Every other log i pull up, for other peoples cars, it shows the the same thing. I know its probably a problem with the configuration of it but i can't figure it out.
Please help!!!

[1107359429]

???? Anyone......

[02bluegt]

???? Anyone......

You need the beta version it seems

[shabby]

Here's another lnf config, its about as sorted/grouped as it can get. You'll need to add these 2 custom pids.

Boost: Sensor - Manifold Absolute Pressure
Function: [PID.11.PSI]-14.5

LTFT+STFT: Sensor - none
Function: [PID.6]+[PID.7]



Fixed o2 b1s2 pid.

[GeoffH]

Thanks Shabby, I will try this out in the morning

[rage915]

where can i get the latest beta version i think im not able to open any of these due to that. get the same error as maxim_x