Page 3 of 3 FirstFirst 123
Results 41 to 45 of 45

Thread: AEM 30-0334-type direct OBDII wideband for older vehicles. Any takers ?

  1. #41
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Posts
    511
    OK. I went ahead and bit the bullet and ordered PCBs for the currently available parts.

    I did make once change, that, maybe 5 people may care about. A added pins to connect an AEM 30-2064 type Exhaust back-pressure sensor kit ( or, roll your own ). So, those interested can have fully compensated AFR and, log the exhaust pressure as a custom PID. Mostly useful for pre-CAT and pre-turbo installations.

  2. #42
    Tuner in Training
    Join Date
    Sep 2021
    Location
    Houston, TX
    Posts
    26
    ^^ that sounds exciting.
    2002 Suburban 5.3L (BTR V2 Stage II Truck Cam Kit) | 4L60E (Corvette Servo)

  3. #43
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Posts
    511
    For those keeping track: The blank PCBs and parts are here. The boards are out for assembly, now. I hope to have the 1st ones, next week.

    Then, I can start the firmware...

  4. #44
    Sounds good sir. I'm not on the board as much these last few weeks, but I still definitely want one

  5. #45
    Tuner in Training
    Join Date
    Sep 2021
    Location
    Houston, TX
    Posts
    26
    Quote Originally Posted by dr.mike View Post
    For those keeping track: The blank PCBs and parts are here. The boards are out for assembly, now. I hope to have the 1st ones, next week.

    Then, I can start the firmware...
    woo hoo!

    another nice update.

    keep up the good work
    2002 Suburban 5.3L (BTR V2 Stage II Truck Cam Kit) | 4L60E (Corvette Servo)