Results 1 to 2 of 2

Thread: Innovate LM-1 Question

  1. #1
    Tuner in Training
    Join Date
    Sep 2021
    Location
    Ontario
    Posts
    20

    Innovate LM-1 Question

    Well i tried to call Innovate a couple of times last week an all i got was answer machine an leave a message which i did an not even got a call back . Tried to E-mail them an got zero response back from them so i am at a loss for words .

    So my question is i have a LM-1 kit # 3723 that i barely used way back in the day an would like to use it with my MPVI2 HPT . I have a serial cable to USB that i can use but from here on in no idea . Or better yet what about the kit serial cable for PC connection can it be used an configured to use with HPT ? The connection is two females right now so i would need an adapter ? Any thoughts on getting this hooked up .

  2. #2
    Tuner in Training
    Join Date
    Sep 2021
    Location
    Ontario
    Posts
    20
    Got it figured out in my case i have the MPVI2 which i can add the Pro Link Cable . Within the Scanner i can set the channels to suit the out put channels on the LM-1 as out put #1 an # 2 .