Results 1 to 3 of 3

Thread: Add PID to race render

  1. #1
    Potential Tuner
    Join Date
    Oct 2021
    Posts
    2

    Add PID to race render

    I'd like to add a gauge and the PID is not listed in the drop down.
    How do I add a PID that I know is available from the vehicle?

    Thanks in advance
    (2021 Mustang GT looking for axle temp)

  2. #2
    Quote Originally Posted by dr.zed View Post
    I'd like to add a gauge and the PID is not listed in the drop down.
    How do I add a PID that I know is available from the vehicle?

    Thanks in advance
    (2021 Mustang GT looking for axle temp)
    RaceRender displays any column in the data file in the dropdown (as well as some calculated or estimated data surrounded by parentheses). If you're looking to add something that isn't already in the dropdown, then you'll likely need to add the PID to whatever app you're using to record your data first (e.g. TrackAddict, RaceChrono, Torque, etc.) before RaceRender will be aware of it.

  3. #3
    Potential Tuner
    Join Date
    Oct 2021
    Posts
    2
    Quote Originally Posted by HoboBob View Post
    RaceRender displays any column in the data file in the dropdown (as well as some calculated or estimated data surrounded by parentheses). If you're looking to add something that isn't already in the dropdown, then you'll likely need to add the PID to whatever app you're using to record your data first (e.g. TrackAddict, RaceChrono, Torque, etc.) before RaceRender will be aware of it.
    Thanks for the reply, I didn't look at TrackAddict to see if I could add the PID. Will check there, thanks for the reply.