Results 1 to 10 of 10

Thread: 2021 Can-Am Maverick x3 Turbo

  1. #1
    Tuner in Training
    Join Date
    Oct 2021
    Posts
    11

    2021 Can-Am Maverick x3 Turbo

    Does anyone know if there is support for the 2021 mavericks? The supported vehicle list says up to 2020 for the maverick and up to 2021 for everything else. Thanks.

  2. #2
    Advanced Tuner
    Join Date
    Jul 2017
    Posts
    451
    Quote Originally Posted by DSoutlaw View Post
    Does anyone know if there is support for the 2021 mavericks? The supported vehicle list says up to 2020 for the maverick and up to 2021 for everything else. Thanks.
    Only the ones that use the Bosch ME17.8.5 ecu.

  3. #3
    Tuner in Training
    Join Date
    Oct 2021
    Posts
    11
    Okay, makes sense. Thanks. Was doing some research and according to S3 power sports, there was a manufacturing change in November of 2020, and they don't offer ecu tunes for the mavericks after that manufacture date.

  4. #4
    Advanced Tuner
    Join Date
    Jul 2017
    Posts
    451
    Quote Originally Posted by DSoutlaw View Post
    Okay, makes sense. Thanks. Was doing some research and according to S3 power sports, there was a manufacturing change in November of 2020, and they don't offer ecu tunes for the mavericks after that manufacture date.
    Only the RR uses the new ecu, all other models use the old ecu. So, if you buy one to mod, buy the lower one, so you can flash it.

  5. #5
    Tuner in Training
    Join Date
    Oct 2021
    Posts
    11
    Okay, thanks for the info.

  6. #6
    Tuner
    Join Date
    Feb 2017
    Location
    Billings,MT
    Posts
    92
    Mine is a '21 Turbo R and built before Sept '20. So, I should be able to tune it.... correct?

  7. #7
    Advanced Tuner
    Join Date
    Jul 2017
    Posts
    451
    Quote Originally Posted by XxScottxXN View Post
    Mine is a '21 Turbo R and built before Sept '20. So, I should be able to tune it.... correct?
    Yes, if it has the Bosch ME17.8.5 ecu

  8. #8
    Potential Tuner
    Join Date
    Nov 2013
    Posts
    7
    Does anyone happen to know the model of the ECU that is replacing the M17.8.5 in the RR models? Can Am list their part number as 420464483, but I haven't been able to cross reference it to the Bosch number.

  9. #9
    Quote Originally Posted by jh122877 View Post
    does anyone happen to know the model of the ecu that is replacing the m17.8.5 in the rr models? Can am list their part number as 420464483, but i haven't been able to cross reference it to the bosch number.
    mg1ca920
    2008 J2 F-350 CCSB

  10. #10
    Potential Tuner
    Join Date
    Aug 2020
    Posts
    2
    I wanted to offer my late MY2021 RR ecu (build date after Nov) is can-am partzilla number 420-464241 has bosch 0 261 S10 15G on the cover. i believe this to be the tricky one that is being tuned via boot/service mode tricks on the board. Hoping this will change eventually. Unable to find specifications or much detail of any kind about this ecu.

    rotax_420464241_bosch_0261s1015g.jpg
    Last edited by cyphers; 1 Week Ago at 02:41 PM. Reason: specifying model of vehicle