Is it true that the new HPT versions tunes for you?

[sneaky]

as soon as we are done beta testing it.

beta testing wil be within a month or less done?

[Bill@HPTuners]

beta testing will begin soon and theres no set timeframe to have it done...when all the bugs are worked out so that you guys run into as few issues as possible with it thats when it will be released...for now use the copy-paste special feature...it too works just fine

[sneaky]

for now use the copy-paste special feature...it too works just fine

Some of us are lazy (just kidding)

[NOS500]

Is there going to be RTT for 2005 on 5.7 VZ Holden, I can RTT up to 2004 VY Holden but that's it. Pretty keen on this as I own a 2005 and I'm putting a blower on tomorrow, would make tuning it easier.

I've just tuned a blown 402 2004 VY Holden with RTT, This is my first big forced induction engine and it was easy.

[SS-Z LS1]

Is there going to be RTT for 2005 on 5.7 VZ Holden, I can RTT up to 2004 VY Holden but that's it. Pretty keen on this as I own a 2005 and I'm putting a blower on tomorrow, would make tuning it easier.

I've just tuned a blown 402 2004 VY Holden with RTT, This is my first big forced induction engine and it was easy.

I also have a 11/2005 VZ 5.7 Holden SSZ Ute, I have RTT working on mine with 1bar SD custom OS. I needed to update to Version 2.14 to get it to work.

Cheers
Jamie

[arthansen]

foff667... you stated "i personally use the 1 bar SD RTT OS on every car i tune now." If I were to get the 1 bar SD RTT OS and tuned my car in SD, can I then (if I chose) copy those tables to my original MAF tune and run with the MAF? I still have not determined that I will run SD all the time but the option would be nice.

[Bill@HPTuners]

foff667... you stated "i personally use the 1 bar SD RTT OS on every car i tune now." If I were to get the 1 bar SD RTT OS and tuned my car in SD, can I then (if I chose) copy those tables to my original MAF tune and run with the MAF? I still have not determined that I will run SD all the time but the option would be nice.

yup and because its one of our SD OS's it removes any secondary VE tables you may have & then adds an 'Alpha-N' TPS multiplyer table, RTT obviously for things like idle, pe,spark,etc...and if you decide on running SD full time you'll have full use of both the high/low octane tables

[Phil'sC5Vette]

Damn this really sounds helpful

[MikeGyver]

Will this use the commanded AFR table? I mean, will the commanded AFR table be adjustable, and the scanner will adjust the VE table according to the AFRs that I have entered?

[MeentSS02]

Will this use the commanded AFR table? I mean, will the commanded AFR table be adjustable, and the scanner will adjust the VE table according to the AFRs that I have entered?

When you are doing a percentage of error, yes, it references what is being commanded.

[12secSS]

Will this use the commanded AFR table? I mean, will the commanded AFR table be adjustable, and the scanner will adjust the VE table according to the AFRs that I have entered?

PE Table and BE Table (if applicable) are adjustable through RTT, so I would image they would be available through the closed loop tuning.

[MikeGyver]

Let me chew up my question, and spit it out in a little different shape: Will you be able to open the commanded afr table, enter the values that you want the engine to run at, and have the vehicle adjust itself to match the table?

[Bill@HPTuners]

Let me chew up my question, and spit it out in a little different shape: Will you be able to open the commanded afr table, enter the values that you want the engine to run at, and have the vehicle adjust itself to match the table?

simple answer is yes. Long answer is you can do that now, you just need to use our copy-paste feature

[tweeder]

I have been reading and some people have rtt. I looked in the help section and found the info there, but don't see it in the scanner. Is it only avaliable in the osesd?

[Arron]

I have been reading and some people have rtt. I looked in the help section and found the info there, but don't see it in the scanner. Is it only avaliable in the osesd?

The RTT icon will appear in the scaner when you are scaning a car with the custom operating system installed and active . The scaner would need to check which group of tables is active to display them .
link to help file

[tweeder]

Thats whatI was wondering. I guess its time to order an upgrade

[slow67]

beta testing will begin soon and theres no set timeframe to have it done...when all the bugs are worked out so that you guys run into as few issues as possible with it thats when it will be released...for now use the copy-paste special feature...it too works just fine

Do ya'll need any extra beta testers?

[redhotjamedjimi]

lol ya im free and quite hardcore plus have the 2.1.15

[PurplePiss]

I'll beta test the LS2 GTO A4.

[MeentSS02]

How's the beta testing going? Or is it?