Can't seem to find a clear answer, when setting up a histogram to tune VVE table using LTFT on the 5th gen do I use MAP/Baro or MAP pressure in Kpa? I know on the older VVE tables the row axis is in MAP Kpa pressure but mine is displaying MAP/Baro.
Thanks
Don't know if this helps or not, but boosted gen 5 uses pressure ratio which can be found in math parameters. Not sure if n/a still uses pressure ratio or not.
That's how I currently have my histogram set up but haven't had time to try it out. I am still N/A unfortunately.
It is pressure ratio typically. You can find out by looking at your files VVE table and seeing if the row identifier says Pressure(KPA) or Pressure Ratio (MAP/BARO). If it is pressure ratio, you will need to make sure you are logging MAP Hi Res and Baro Hi Res, meaning the non SAE PID's.
Reply With Quote