I used the data off ID's website and I "think" I did it correctly. The reason I'm questioning if it's right or not is my VE seems really low for 12ish lbs of boost. Above 6krpm it goes stupid rich, like down to .70. If I took out 10% to get it to commanded my VE would be in the high 90's which doesn't seem right to me.
Base pressure is 58psi
ID 1000's
pump E85
holley boost referenced FPR
dual hellcat pumps
-8 feed, -6 return plumbed the correct way.
I'm thinking I have to put the data in wrong