Results 1 to 3 of 3

Thread: Flex Fuel Setup for Late Model Hemi (2014 5.7L Grand Cherokee)

  1. #1
    Potential Tuner
    Join Date
    Mar 2022
    Posts
    1

    Flex Fuel Setup for Late Model Hemi (2014 5.7L Grand Cherokee)

    My little brother has a 2014 Grand Cherokee with the 5.7. He's had American racing headers, BBK 90mm TB, AEM CAI, and Corsa Catback for awhile as well as a Jay Greene Engine and Trans Tune on 91.
    He just picked up a RIPP supercharger kit for and wanted to run e85/ flex fuel down the road.

    As far as my searching goes i've only found basically standalone Flex fuel kits that don't seem to integrate into HPTuners for Jeep/Dodge but do for GM.

    The ones i've found are:
    https://www.advancedfueldynamics.com...rokee-5-7-hemi

    and

    https://www.apeflexfuel.com/store/MO...ion-p166097279

    Are there any Kits that are a plug n play for the stock wk2 Jeep ecu on HPTuners? Im fairly familiar with wiring so if needed i could wire it in to an input that might not be used and change it in HPTuners.

    Thanks!

  2. #2
    Tuner
    Join Date
    Sep 2012
    Location
    CA
    Posts
    51
    I?m bumping this up to the top to see if anyone has come across anything for this platform yet.

    I have a 2012 Jeep SRT8. I have started to dive into the tune on it and I noticed there are some Flex Fuel tabs that are in the factory tune file. Can this be enabled somehow? My understanding is there are no alcohol content sensors on these vehicles. Someone please correct me if I?m wrong?

  3. #3
    Senior Tuner
    Join Date
    Jan 2022
    Location
    fountain valley
    Posts
    1,440
    no, you are correct...

    on the hellcats the factory tried to put a sniffer in the charcoal canister and read it when the evap solenoid opended

    lame


    i found a box that works great

    no matter how big of a injector you are running : )

    hit me up if you are serious about converting to flex fuel
    [email protected]

    don tanklage