Originally Posted by
TriPinTaZ
IDLE > RPM > ADAPTIVE IDLE > Immediate and Predicated tables
Try zeroing out the 15 and -15 RPM columns and reducing the rest of the table by 5-10-15%. See if you get a bit more chop. Don't go too crazy here or the car will drive like crap and stall.
As a note, you would reduce the positive numbers and increase the negative numbers equally. You want the same values on both sides opposite of each other, just one is positive and one is negative.
Example, if you change 100 RPM from 13.92 to 12.5, you want to change -100 from -13.92 to -12.5. Keep it symmetrical.