I have fiddle and fingered the burble logic until my eyes are going to pop out, even tried reducing low load timing 3k-6k rpms and deactivating dfco with no real luck. I did notice sometimes if i slightly touched the throttle it would pop a little but not all the time. I even tried -10 degrees on the mbt low load areas and when it did pop it was gunshots. I have searched high and low for a guide or information about the ecoboost burble logic with no luck. I have seen hundreds of different methods. Please some explain the burble area and how it works or coincides with the other maps. Am I not setting some things up elsewhere i should be?