E38 ECU with SD 2 bar OS (12606732 -> 1250202) for Corvette LS2 (orignally). As far as I can tell, there's zero modifiers that take into account Oil Temp, is this correct?
For thoese wondering why I ask, The C6 has the oil level/temp sensor in the oil pan on the same stick. The pan I have doesn't have room for it with the baffling (milodon) so we just zip tied it to the side of the motor for now. It can read stupid high temps for obvious reasons.
I do have a project to confirm I can wire that temp wire to a GM coolant temp sensor, if so, I got a spot in the oil lines for it (can any one confirm the ohm's are the same?!?!?! )