I can't edit Virtual Torque in the last two beta releases. No matter what I do, the numbers wont change. If I open the same file in 4.10.x, I can once edit Virtual Torque again.
I can't edit Virtual Torque in the last two beta releases. No matter what I do, the numbers wont change. If I open the same file in 4.10.x, I can once edit Virtual Torque again.
Same here.
www.crawford-racing.com
Home of the original and best selling CR-Fueler plug and play port injection controller kits for all GM Gen V direct injection platforms.
V5.1.5 BETA still has broken Virtual Torque Tables....
www.crawford-racing.com
Home of the original and best selling CR-Fueler plug and play port injection controller kits for all GM Gen V direct injection platforms.
We are aware and are working on resolving the issue.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
So this isn't something that just gets "unlocked" after going through the epa/advanced parameters class then? Haven't taken the class yet to know myself. Just thought this was part of it since a lot of other tables weren't editable anymore either until doing "this" class.
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
The non Beta 5.04 version doesn't allow Virtual Torque editing either. Interesting this is disabled and actually made it into the public release version 5.x. It's not like they will ever tell us, but I'm betting this isn't a mistake. There was just a firmware update to the MPVI interfaces too.....I wonder what sort of restrictions are secretly being implanted for later implementation.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
where is info about this "class"???
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
https://youtu.be/Ma0CkdnDkrw?t=17Originally Posted by [email protected]
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
New beta up with the fix
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Hi Bill. So just to clarify. If I were to update to the latest Beta, with the passing of the parameter access (I did), updating of firmware on my MPVI2 W/pro upgrade to latest version, I will have access to previous removed parameters including "adjusting" them as long as I have agreed to only modify them as long as it does not break any of the CCA? As in it will work similar but better than suites of year(s) ago?
Sub'd
I always tune VVE....
2016 C7 M7 Z51
Callies ultra billet crank
Callies ultra billet rods
Diamond pistons
Jhonson high speed lifters
Ported and polished headwork
Custom cam
YSi-V7
How about a link to the fine print before committing to 5.0?
I would be interested to see the T's&C's, in laymans terms in respect to what, if any information you have to report to ANY authority. Ownership, intellectual properties etc.
I always tune VVE....
2016 C7 M7 Z51
Callies ultra billet crank
Callies ultra billet rods
Diamond pistons
Jhonson high speed lifters
Ported and polished headwork
Custom cam
YSi-V7
Last edited by TriPinTaZ; 09-19-2022 at 07:15 AM.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
My bad. I apologize. My specific question is If I am using a mid version 4.xx and wanted to know if any or all of the items that could be "adjusted" that were no longer available in version 4.9 or so are now grayed out are now available as long as you take and pass the CAA course and enter in the code. I will now patiently wait.