I'm fairly new to using HP Tuners but trying to learn as quickly as possible. So here is the deal, I have a 2005 C6 corvette with a mail order tune from LGM. I just purchased a set of Bosch 47.1lb injectors from Lingenfelter rated at (5.93 grams/second (47.1 lbs/hr) at 4 bar (58 psi) fuel pressure ). My question is, do I only need to tweak the IFR table to get the car running semi-decent? I have a dyno tune scheduled friday at Synergy Motorsports but was hoping to get the injectors installed and the car drivable before that date. I would really appreciate any help. I'm trying to locate specs like min pulse width, etc. but that info is hard to come by.