Mpg Pid

[LS1chevy2]

is this the agreed upon formula

[SENS.20]/(([PID.6210]*0.132276)*[SENS.112]*[SENS.70]*8/(6175*(((([SENS.11]+[sens.10])/2)+273.15)/299.8167)))

I might not have entered this in the right locations

[EC_Tune]

For V8's. You have to change the *8/ to *6/ to do V6's

[LS1chevy2]

I could not get this to work.
I checked out the how to creat a pid tutorials.

MPG PID says its missing a parameter.

Could you look at my config and see what I left out?

I also attached my first run with the lean cruise enabled.

[EC_Tune]

You have to be logging all the parameters listed in the PID in your table view.

[LS1chevy2]

I thought I was.
Do you know which ones I was/am missing?

Do I have to create PIDs to make the mpg PID work?

It's only on the mpg.cfg


hospital.hpl does not contain the mpg PID

[LS1chevy2]

I figured out one problem.
PID.6210 is not available on my LS1
The motor and ecu is out of an 04 GTO it must have not made it overseas.

does anyone know if I can create or substitute this PID?

[LS1chevy2]

Well it works I'll post my file later.
Just incase there's someone out there like I was.

I get 25 mpg at 65mph 23mpg at a little over 70.

the weird thing is even at 55 the mpg was still 25.

The difference between 5th gear and 6th at low speeds was worth 2-3 mpg.