In my 98 Trans Am I still have a stock 4L60E with the original converter.
I would like to reprogram the transmission to fit the increased power (Supercharger, 400 HP and 400 FtLbs at the crank) but I'm stucked with a problem:

on the scale base pressure vs torque the torque scale goes up only to 320 FtLbs, how is the PCM handling the situation?

When I set the max torque to an higher value the calculated torque is increased also. Example: if I set 600 FtLbs as a max I'll see about 600 FtLbs at WOT, also if the engins isn't making so much. How do I have to set this value? Same as what the engine is really making?

Thanks - Stefano