I didn't see them mentioned in the other thread, but are Ford Diesels on the project table as well? I've got a guy with a 2008 F-250 thats itching to have it tuned. I'd like to be able to tell him that the possibility is on the horizon.
I didn't see them mentioned in the other thread, but are Ford Diesels on the project table as well? I've got a guy with a 2008 F-250 thats itching to have it tuned. I'd like to be able to tell him that the possibility is on the horizon.
2016 Camaro SS
Same here, my brother-in-law has an 08 as well. I also have a 2001 7.3 that i would like to do.
2006 Ford F250 CCSB 6.0 Powerstroke
SCT Tuned by Vivian @ QuickTricksAutomotive
yes they are, we've actually received quite a few ford diesel reads & we'll take all that we can get so send em our way support at hptuners dot com
-Bill
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Mine won't scan. It's a 2004 6.0. It keeps telling me it's trying to reconnect. I have 2.1.18 and the MPVI has been updated.Originally Posted by Bill@HPTuners
Bob K
BoMar Racing
Rookie of the Year -Englishtown. NJ
Member - Panuzzo Racing
Member - NHRA
Bob,
Please try and get me a vcm suite infolog while connected to the vehicle and send it directly to me at bill at hptuners dot com or support at hptuners dot com and I'll try and get you a version that will read it.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Hi Bill l will be more than happy to give you reads from my customers Diesel trucks but l do not want to use my credits.
Martin
Last edited by maxchevy; 01-09-2008 at 09:10 PM.
No credits are necessary for reading a PCM only writing it.
Always Support Our Troops!
Originally Posted by Bill@HPTuners
Bill,
I am confused now. I emailed you & told you about not being able to read or scan a 2000 ford diesel. You said you can not. You are now saying that I should be able to read it then? It kept telling me that it did not have a power source, but the light was on, but it would bomb out right away.
2006 LBZ Duramax 4x4 CC SB 2500HD SRW 4x4 LT1 (with extras), Blocked & Fingered, Fumoto drain valve, Keystone Ram Air Good Hood, Banks Ram Air, Access cover & Rhino over the rails, Victory Red.
33'-0" Dutchman fifthwheel,Tekonsha Voyager Brake Controller
Banks Sixgun with HPTUNERS.
http://www.hptuners.com/forum/showthread.php?t=15929Originally Posted by CRASHNBURN
00's use a completely different pcm, we are however accepting 03+ reads currently.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Originally Posted by Bill@HPTuners
Ahh, I see says the blind man.. thanks.
2006 LBZ Duramax 4x4 CC SB 2500HD SRW 4x4 LT1 (with extras), Blocked & Fingered, Fumoto drain valve, Keystone Ram Air Good Hood, Banks Ram Air, Access cover & Rhino over the rails, Victory Red.
33'-0" Dutchman fifthwheel,Tekonsha Voyager Brake Controller
Banks Sixgun with HPTUNERS.