Cobalt SS with stage2 pulley
If seem to rev cut sometims anywhere from 6000-7300 rpm
not on every dyno run but it cut
How can I see if I max the MAF?
Cobalt SS with stage2 pulley
If seem to rev cut sometims anywhere from 6000-7300 rpm
not on every dyno run but it cut
How can I see if I max the MAF?
I was unaware that people were maxing the MAF on stage 2.
2007 Cobalt SS 2.4 5spd SUPERCHARGED
Very unlikely you maxed it. Check your logs and look at about 5800rpm thats when they go straight maf and usually you might get a bump there. Are you logging maf??? That be one easy way to see if you maxed it.
the scan file, and the dyno sheet when it cut
you are most definitely not maxing it out. I'm running a big ass turbo and over 400whp and still not maxing it.
btw do a log, max hz read by the comp is 11,111hz, if you are hitting that, you are actually maxing out your injectors not the maf itself
2006 cobalt (no more turbo)
m62 2.7 pulley, E85, 79lb/hr injectors, 4-2-1 longtube header, airbox mod, stock catback
1998 Trans am 5.3 iron block 317 heads 88mm turbo e85 105lb/hr injectors, twin 255's.... build in progress
2014 wrx mild tune 18psi pump gas
where in the log I could see the max hertz?Originally Posted by black06g85
You have to log the MAF.
Formerly known as RWTD
Toys: '22 Tesla Model S Plaid / '20 Chevy Duramax / ?20 Sea-Doo RXT-X (2)