Yes definitely a good idea to verify its vehicle specific & not cable/interface specific.Originally Posted by proggod
Yes definitely a good idea to verify its vehicle specific & not cable/interface specific.Originally Posted by proggod
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
That was it!! it was blown for sure!!Originally Posted by Stingray123
But the rear defogger works lights up???
Im gonna try and tune it know
Cross your fingers!!!
Mike
2007 C6 coupe LS3 416 6 speed mn Z51 3LT
Vararam Snake charmer 160 Stat
Kooks 1 7/8 headers with jet hot
Fast 102 ported intake 102 TB RPM Level 5 T56
MGW short throw ZIP 4.10 Severe Duty rear
RPS TWIN DISC CARBON CLUTCH CCWs ele wp
RPM LEVEL 5 TRANS W/HARDENED OUTSHAFT
http://www.youtube.com/watch?v=PtOPy_lp2QY
10.66 1.47 60ft 133+mph
THAT WAS IT!!!!!
Bill can we make a sticky with a pic of the fuse that needs to be replaced
and that its a 10amp the name REAR FOG/ALDL/TOP SWITCH for future reference to help other people in the future??
Mike
Thanks a million Stingray123!!!!!!!!!!
Mike
2007 C6 coupe LS3 416 6 speed mn Z51 3LT
Vararam Snake charmer 160 Stat
Kooks 1 7/8 headers with jet hot
Fast 102 ported intake 102 TB RPM Level 5 T56
MGW short throw ZIP 4.10 Severe Duty rear
RPS TWIN DISC CARBON CLUTCH CCWs ele wp
RPM LEVEL 5 TRANS W/HARDENED OUTSHAFT
http://www.youtube.com/watch?v=PtOPy_lp2QY
10.66 1.47 60ft 133+mph
Thanks again to everyone for the help!!!
Im greatful!!
Mike
2007 C6 coupe LS3 416 6 speed mn Z51 3LT
Vararam Snake charmer 160 Stat
Kooks 1 7/8 headers with jet hot
Fast 102 ported intake 102 TB RPM Level 5 T56
MGW short throw ZIP 4.10 Severe Duty rear
RPS TWIN DISC CARBON CLUTCH CCWs ele wp
RPM LEVEL 5 TRANS W/HARDENED OUTSHAFT
http://www.youtube.com/watch?v=PtOPy_lp2QY
10.66 1.47 60ft 133+mph
Can one of you take a picture of where this fuse can be found so i can reference it in the sticky?
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Email sent
Mike
2007 C6 coupe LS3 416 6 speed mn Z51 3LT
Vararam Snake charmer 160 Stat
Kooks 1 7/8 headers with jet hot
Fast 102 ported intake 102 TB RPM Level 5 T56
MGW short throw ZIP 4.10 Severe Duty rear
RPS TWIN DISC CARBON CLUTCH CCWs ele wp
RPM LEVEL 5 TRANS W/HARDENED OUTSHAFT
http://www.youtube.com/watch?v=PtOPy_lp2QY
10.66 1.47 60ft 133+mph
I would assume that fuse is in the same location from 05-08 models.Originally Posted by Bill@HPTuners
EDIT: You beat me to it 1Bad
David - 07 C6 w/A6
(GMautotech @ CorvetteForum)
Stingray or 1Bad, where is this fuse panel located? an expanded shot of the area would be great, I can photochop in arrows & stuff as long as you can get me a pic of the area so people can see where I'm referring to.Originally Posted by Stingray123
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Passenger side firewall fuse panel.Originally Posted by Bill@HPTuners
Thanks 8850!
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"